Tray definations​

​Composed bench trays normally consist of end-middle- and division trays.

End trays.

​An end tray finishes the bench. Therefore there is always an end tray on each end of a bench tray.

End trays are delivered as standard with a valve sump, but can also be delivered without valve sump. In many cases it is not necessary with 2 valve sumps in a short bench tray.​

​End tray with valve sump

End tray without valve sump

​Middle trays

​Middle trays are used as needed, all depending on the desired length of the bench tray.

Middle tray

​Division trays

​Division trays are tray pieces that are adjusted a specific measurement so the total tray top gets the exact required length.

Division tray

​Examples of configuratinons.

Consisting of an end tray with sump, a division tray, three middle trays and an end tray without sump.

Bench tray consisting of an end tray with sump, a division tray and an end tray without sump.

Bench tray consisting of an end tray with sump and a shortened en tray without sump.

Bench tray consisting of a shortened end tray with sump and ended with a strip glued on.

About us

Stål & Plast A/S has been manufacturing Ebb & Flow bench trays in high impact polystyrene (HIPS) since 1984.

​Stål & Plast A/S​

Industrivej 19 DK-5750 Ringe

Fax: +45 6262 3611

CVR: ​11760074