Stål og Plast A/S has been manufacturing Ebb & Flow bench trays in high impact polystyrene (HIPS) since 1984.

Today the comprehensive bench tray system is sold through a worldwide network of distributors. Distributors are typically greenhouse construction companies who install the trays as part of a turnkey projects as purchased by nurseries.

Over the years, the bench trays have been thoroughly tested for use with fertilizers, effects of temperature change, UV radiation and general daily wear in a modern greenhouse. This knowledge is used for continuous improvement and to optimize the products, so that today they represent the industry`s absolute best quality.

The bench trays are manufactured on modern automatic vacuum forming machines which are optimized for the production of Ebb & Flow bench tops. The production facilities are operated mainly by robots which are supervised by specially trained personnel with many years of experience.

In 1996 Stål & Plast A/S started its own production of the raw plates which used for the finished bench trays. Production takes place in a modern co-extruding plant which makes it possible to produce raw plates in three layers. This allows for the finished bench tray to be produced exactly to the specifications required by the customers. For example, with an additional UV-protective layer on the upper side of the tray, different colours, etc.

​Our own production of raw plates also allows us to provide extruded sheet profiles in high impact polystyrene (HIPS) to other companies. Stål & Plast A/S currently supplies raw sheets to a range of plastic companies who use HIPS sheets for further processing of various products.

Today Stål & Plast offers the following products and services:

  • Ebb & Flow bench trays in all sizes - including mobile bench trays manufactured as one complete piece up to 1720x6200 mm.
  • Co-extruded plate profiles in high impact polystyrene (HIPS) in dimensions up to 1820x6500x5 mm.
  • Vacuum forming of various items according to customer specifications, in dimensions up to approx. 1720x6250 mm.

Uniformity, high quality and short, reliable delivery times are keywords for Stål & Plast`s products.

Stål & Plast has 6000 sq.m. of modern production and storage premises.

About us

Stål & Plast A/S has been manufacturing Ebb & Flow bench trays in high impact polystyrene (HIPS) since 1984.

​Stål & Plast A/S​

Industrivej 19 DK-5750 Ringe

Fax: +45 6262 3611

CVR: ​11760074